Ford 6.7L Triple Turbo Kit

Ford 6.7L Triple Turbo Kit

Starting at $10,999.00

SKU: 122014

H&S Motorsports is proud to introduce the Triple Turbo Kit for the 2011 - 2019 6.7L Power Stroke diesel. This kit is not for the...

Call For More Info

H&S Motorsports is proud to introduce the Triple Turbo Kit for the 2011 - 2019 6.7L Power Stroke diesel. This kit is not for the faint of heart! It starts with the highest quality most complete single turbo kit from HS-Motorsports, and then we add two more turbo's to the mix for the ultimate compound turbo set up. The beauty of this set up is the ultimate in spool and tune-ability in the sizing of turbo options to meet everyone's horsepower needs. Depending on turbo sizing and supporting engine modifications they can be sized anywhere from 700hp to 1600hp. You can use any size of Borgwarner S300 turbo combinations, and if needed an Borgwarner S400 is an option for the valley (first stage) turbo. Precision Turbochargers are also an option upon request.

  • PLEASE CALL TO DISCUSS FINAL BUILD, PRICING AND OPTIONS
  • THIS PRODUCT IS MADE TO ORDER AND REQUIRES A 4 WEEK LEAD TIME
  • THIS PRODUCT REQUIRES HALF DOWN DEPOSIT TO START THE ORDER.
  • FINAL PAYMENT WILL BE REQUIRED BEFORE PRODUCT SHIPS.

ANY CANCELLATIONS ARE SUBJECT TO A 50% CANCELLATION FEE

Turbocharger Size Options

  • We offer several different compressor wheel sizing / options
  • This kit DOES NOT work with a VGT in the valley

WE CANNOT GUARANTEE FITMENT AND FUNCTIONALITY WITH ANY OTHER TURBOCHARGER VARIATIONS THAT WE DO NOT OFFER

BorgWarner S300 SX-E Turbochargers:

  • 63mm Forged-Milled Compressor Wheel
  • 64mm Forged-Milled Compressor Wheel
  • 66mm Forged-Milled Compressor Wheel
  • 69mm Forged-Milled Compressor Wheel
  • 72mm Forged-Milled Compressor Wheel

*All of the above S300 options include the 73mm turbine wheel and 1.00 A/R divided turbine housing, unless requested otherwise.

BorgWarner S400Turbochargers:

(Only available as high pressure (Valley) Turbo)

  • 67mm Billet Compressor Wheel
  • 72mm Billet Compressor Wheel

*All of the above S400 options include the 83mm turbine wheel and 1.10 A/R divided turbine housing, unless requested otherwise.

Precision Turbos:

  • Various turbo sizing options available. Please call for further details

Piping

All HSM piping is fabricated out of high quality steel and tig welded with amazing precision. We take pride in knowing that the fit and finish of every pipe will be at OEM quality or better. Piping is available in raw form (to be coated by you in the color/style of your choice), or you can pick to have it coated in a classy textured black finish as pictured above. Bungs are welded into place in convenient locations for connecting your water injection, nitrous, or any other 1/8" NPT accessory. Plugs are included if you choose to not use any of the supplied bungs. A two piece downpipe is included and will require a 5” aftermarket exhaust system. All piping is crafted here in the USA.

*Prismatic Powder color options are available upon request

Cast Parts

You will be receiving 3 custom cast pieces with your HSM turbo kit (2 exhaust manifolds and 1 turbo pedestal). These parts were engineered and produced here in the USA using the best possible materials to ensure they will withstand the most extreme temperatures and pressures. Provisions in the exhaust manifolds for exhaust gas temperature sensors (factory sensor or 1/8" npt) are provided, as well as a location to install the OEM exhaust back pressure sensor. All secondary turbo piping is made out oh high quality stainless steel with a billet steel turbo distribution manifold.

Wastegate Provision

  • The HSM driver's side exhaust manifold is machined to accept a wastegate.
  • Turbosmart 40MM Wastegate is included with this kit to maintain proper drive pressure.

Oil Pan & Scavenge Pump

  • 1 aftermarket deep oil pan with billet mounting adaptor for scavenge pump is included.
  • 1 Turbo Scavenge pump is provided to properly drain atmosphere turbochargers

Air Intake

  • 1 Intake pipe with Mass Air Flow sensor provision included
  • 2 S&B Air Filters and Outerwears inlcuded

Intercooler

  • An aftermarket intercooler is NOT provided with this kit, but is highly recommended

*HSM can provide an aftermarket intercooler upon request

Batteries

  • 1 Battery (Passenger Side) must be relocated and / or installation of 1 single high capacity battery located on the drivers side

Factory Components

  • The factory Heat and AC system is maintained with this kit. Slight modification is required

Conclusion

One look at our components and you'll understand why they are the best on the market. From the custom engineered castings to the full color detailed instruction manual, there was no expense spared during the development of this product. All parts are included with the kit to make installation as simple as possible.

Whether you're looking for a performance gain or just wanting something to replace the OEM unit, this kit is a great solution for you. It will make your 6.7L Power Stroke run like it is supposed to!

**Professional installation is recommended. Please contact us for certified installers.

** The end-user is always responsible for verifying proper boost/drive pressure ratios. Other exhaust housing options and/or wastegate solutions may be suggested to prevent turbocharger damage on some specific applications. If you need assistance with your particular application, please contact us prior to purchasing or installing this kit.

*** Since this kit includes a brand new BorgWarner unit, turbocharger warranties will need to be done directly through BorgWarner. Click here for the BorgWarner Performance Turbocharger Warranty Statement

*** Since this kit includes a brand new Precision Turbo unit, turbocharger warranties will need to be done directly through Precision Turbo. Click here for the Precision Turbocharger Warranty Statement